|
|
|
| Usually caused by | Cured by |
| Wax too hot. | Adjust temperature. |
| Wax has been reused. | Use new wax. Use no less than 90 new wax with reused. Try avoiding using old wax. |
| Moulds cooling too long before opening. | Inject fewer moulds during production cycle. |
| Using unsuitable wax. | Use wax that is suitable to type of pattern being produced. |
| Casting problems | |
| Wax pattern problems | |
| Mould rubber problems | |
| Mixing guide | |
| De-wax and burnout cycles | |
| Sitemap | |
